The STOPL-T-F1 device is used to temporarily interrupt the flow of medium in the pipeline with overpressure without any leakage of the medium. The device works on the principle of inserting a stopling cylinder through a hole drilled into the pipeline and its mechanical compression in the drilled hole until the media flow is interrupted.
- Fast and simple assembly
- Low weight
- Frame construction system
- DN65 - DN100 threaded design
- Locking with retractable pins
- Simple bypass solution
Technical parameters
Material and diameter of cut-off pipeline: steel pipeline DN65-DN150
Medium: natural gas, non-aggressive gas, other medium after consultation with a producer
Maximum overpressure in cut-off pipeline: up to 10 bar (1,0MPa)
Working temperature: /10/+50 °C
Device STOPL-T-F1 (for pipelines with inner diameters 65-500 mm, pressure up to 8bar)